| Main body | Model | MDS-10 short path distillation |
| Material tank | 5L jacketed stainless steel tank |
| Material charging | Pressure-difference valve |
| Flow 3L～15L/H |
| 200W motor, electronic speed regulation. |
| Evaporator | Evaporation area 0.1㎡ |
| Film forming way: scraper (roller is optional) |
| Material: 316L |
| Mechanical seal (Magnetic seal is optional) |
| Film forming moto: 370W, Mechanical constantly variable transmission,200～1000 rpm/min |
| Cold trap | 1. 0.4㎡chiller cooling cold trap |
| 2. 3L liquid nitrogen cold trap |
| 3. Dual-purpose (chiller & liquid nitrogen cold trap dual purpose). |
| Choose 1 in above 3 types |
| Heavier component discharge | 29# Grinding mouth adapter |
| 10L glass bottle 1pcs, bottle holder 1pcs |
| Lifting table 1pcs |
| Lighter component discharge | 29# Grinding mouth adapter |
| 10L glass bottle 1pcs, bottle holder 1pcs |
| Lifting table 1pcs |
| Material pipeline | Jacketed insulation |
| Shelf & assemble | 304 stainless steel pipe |
| Accessory | Vacuum | 1. No-load ＜ 10PA |
| 2. No-load ＜ 5PA |
| 3. No-load ＜ 1PA rotary vane roots pump set |
| 4. No-load ＜ 0.01PA rotary vane molecular pump set (Single phase 220V) |
| Vacuum measurement | Resistance / thermocouple vacuum transmitter |
| Main evaporator heating | 300℃/6KW, UC5030 |
| Raw material section insulation | 200℃/3KW, UT-3020 |
| Heavier component insulation | 200℃/3KW, UT-3020 |
| Lighter component condensation & insulation (CBD lighter component could share with material feeding tank) | Internal condenser — High & low temperature all-in-one machine |
| Insulation —200℃/3KW |
| External cold trap cooling | 1. Liquid nitrogen cold trap, lowest temp. could reach -190℃, cooling to collect ultra light component with high efficient. |
| Or 2. Chiller |
